The jack is there, the winter tires are against the garage wall, and the car is waiting in the driveway. You kneel down and are about to start turning when the thought strikes you: ”Should the handbrake be on while you change the tire, or does it not matter?”
When you jack up your car, it stands on only three wheels and balances on a small point under the body. Anything that prevents the car from rolling away makes the job safer. On most cars, the handbrake only works on the rear wheels, so it holds the car still even when one wheel is lifted.
Therefore, the handbrake should be in
- The car cannot be rolled off the jack. (a slight incline is enough for the car to start moving)
- The wheels don't spin when you loosen the lug nuts. (You can also loosen the nuts a little while the car is still on the ground so you don't have to pry and risk jolting the car while it is raised on the jack)
- The gear provides extra support (put in first or reverse on manual transmission, P on automatic transmission)
- Stop blocks lock the last (a wedge at the wheel that sits diagonally to what you are lifting)
Have the car? electric parking brake It works the same way when changing a regular wheel. It only needs to be set to service mode if, for example, the rear brakes need to be repaired.
Is it dangerous to not do it?
Yes, it can. A car rolling a few inches can tip the jack, causing the car to fall onto the hub or onto you.
The jack that comes with the car is made for changing a wheel, not for carrying the car for a long time. Never place any part of your body under the car when it is only on the jack.
How to change tires safely at home
- Park the car on a flat and firm surface, not on loose gravel or soft asphalt.
- Apply the handbrake, engage a gear or P and place chocks
- Loosen the wheel nuts half a turn while the wheel is still on the ground
- Place the jack on the car's lifting point, it is stated in the instruction manual
- Tighten the nuts crosswise and then with a torque wrench when the car is on the ground again.
- Retighten the nuts after a few miles of driving.
Take the opportunity to check that the tires not sitting in the wrong direction, and consider whether they should change places. More about that in How often should you rotate your tires?
Do you lack a torque wrench, or do you feel unsafe? Then the workshop will do the wheel change for you.
Summary
Yes, the handbrake should be on when changing a tire. Also, put a gear or P in and put chocks on so the car cannot roll off the jack.
Stand on level ground, loosen the nuts before lifting and retighten them after a few miles.
This question was answered by Olga Granbom
Workshop Manager & Deputy Service Market Manager